R-RPS B3 HAND HELD POLYURETHANE FOAM, 750ML [BOX OF 12]

Description

Low-pressure, one-component polyurethane foam with delivery tube

Wear protective gloves. Ensure surfaces are free from dust, dirt or debris.
Remove the frost from the working surface.
Before using, make sure that the can temperature is above zero (optimum +20°C). Application temperature from -10°C up to +30°C.
Shake can vigorously for 30 seconds to mix properly components.
Screw straw-applicator onto the can. Hold can upside-down during application.
Fill gaps from down to up, zigzag motion, alternating from one wall to the other. Fill gaps to approximately 60 % volume. Max. wide of the gap 5 cm. Gaps wider than 5 cm should be applied after hardening of the previous layer.
After full curing, cut the excess foam with a knife and protect it from UV exposure by coating with plaster, paint, acrylic or silicone.