R-RPP-45 B3 POLYURETHANE GUN FOAM, 750ML [BOX OF 12]

Description

Low-pressure, one-component polyurethane foam with applicator gun.

Wear protective gloves. Ensure surfaces are free from dust, dirt or debris.
Remove the frost from the working surface.
Before using, make sure that the can temperature is above zero (optimum +20°C). Application temperature from -10°C up to +30°C.
Shake can vigorously for 30 seconds to mix properly components.
Screw gun onto the can. Hold can upside-down during application.
Fill gaps from down to up, zigzag motion, alternating from one wall to the other. Fill gaps to approximately 60 % volume. Max. wide of the gap 3-4 cm. Wider gaps should be applied after hardening of the previous layer.
After full curing, cut the excess foam with a knife and protect it from UV exposure by coating with plaster, paint, acrylic or silicone.
In the event of a stoppage exceeding five minutes duration, wipe the nozzle with cleaner for foam applicator.
After removing the applicator gun from the can, wipe down the nozzle and gun (internal and external surfaces) using a cleaner.