KI-10NS SCREW IN INSULATION FIXING WITH LONG EXPANSION ZONE 10/220MM [BOX OF 250]

Description

Screw-in facade fixing with 60mm long expansion zone for high performance in all base materials

Quick and easy installation in all substrates
Approved for use in all base material categories A,B,C,D,E
Steel screw allows fast and trouble-free installation with correct expansion of the plug
Reduction of thermal bridge formation (value 0.3W/K) through the integration of an impact-resistant plastic overmoulding on the screw head.
Plate stiffness (value 0.5 kN/mm) ensures smooth elevation surface and stable insulation system.
Can be used with additional KWL insulation holding plate, available in 90, 110 and 140mm flange sizes (recommended for soft insulation materials such as mineral wool).

Drill a hole of required diameter and depth
Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached
Tighten screw until fixing is secure and flush with insulation material
Embedment depth of min 40mm in concrete and 60mm in other approved materials
Drilling depth of min 60mm in concrete and 80mm in other approved materials
Temperature range when installed -35C to +80C.
In soft insulation panels the fixing should be combined with insulation retaining plates KWL-90, KWL-110, KWL-140.

Specifications

Applications	External Thermal Insulation Composite Systems (ETICS) Polystyrene (EPS) boards Mineral wool (MW) boards Light wood wool building boards Polyurethane (PU) boards Lightweight recycled panels
Base Materials	Concrete C12/15-C50/60 (Use category A) Solid Brick (Use category B) Hollow Brick (Use category C) Vertically-perforated clay block (Use category C) Reinforced components of lightweight aggregate concrete (Use category D) Aerated Concrete Block (Use category D)

Attachments

Reviews (0)

There are no reviews yet.