![KI-10 HAMMER-IN FACADE FIXING WITH PLASTIC PIN 10/220MM [BOX OF 250]](/product/image/medium/ki-220_0.png "KI-10 HAMMER-IN FACADE FIXING WITH PLASTIC PIN 10/220MM [BOX OF 250]")
![KI-10 HAMMER-IN FACADE FIXING WITH PLASTIC PIN 10/220MM [BOX OF 250]](/product/image/small/ki-220_0.png "KI-10 HAMMER-IN FACADE FIXING WITH PLASTIC PIN 10/220MM [BOX OF 250]")
KI-10 HAMMER-IN FACADE FIXING WITH PLASTIC PIN 10/220MM [BOX OF 250]
Item No.
KI-220
Hammerset insulation fixing with reinforced plastic nail
Description
Hammerset insulation fixing with reinforced plastic nail
Features and Benefits
- Installation in all substrates (categories A,B,C,D,E).
- The plastic nail reduces heat transmission (value 0.0W/K)
- Plastic nail reinforced with glass fibre allows fast and trouble-free installation with correct expansion of the plug.
- Expansion zone designed for low embedment depths, reducing the amount of drilling required.
- Can be used with additional KWL insulation holding plate, available in 90, 110 and 140mm flange sizes (recommended for soft insulation materials such as mineral wool).
- Optimal product parameters enable cost-saving solutions.
- Optimum plate stiffness ensures stability and excellent pull-over values
Base Material
Concrete C12/15-C50/60 (Use category A)
Solid Brick (Use category B)
Solid Sand-lime Brick (Use category B)
Hollow Sand-lime Brick (Use category C)
Vertically-perforated clay block (Use category C)
Hollow Lightweight Concrete Block (Use category D)
Lightweight Concrete Block (Use category C).png)
Reinforced components of lightweight aggregate concrete (Use category D)
Aerated Concrete Block (Use category D)
Applications Categories
Facades - ETICS
Facades - ETICS-2
Facades - ETICS-2
Thermal Insulation / ETICS
Facade insulation / ETICS
Installation Guides
- Drill a hole of required diameter and depth
- Drilling depth of min 35 in masonry, 50mm in perforated materials and 70mm in lightweight concrete block and aerated concrete
- Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached
- Embedment depth of min 25 in masonry, 40mm in perforated materials and 60mm in lightweight concrete block and aerated concrete
- Lightly tap the plastic nail into the plastic sleeve until fixing is secure and flush with insulation material.
Specifications
| Applications | External Thermal Insulation Composite Systems (ETICS) Polystyrene boards Mineral wool (MW) boards Light wood wool building boards Polyurethane boards Wood fibre boards Lightweight recycled panels External Thermal Insulation Composite Systems (ETICS) |
| Base Materials | Concrete C12/15-C50/60 (Use category A) Solid Brick (Use category B) Solid Sand-lime Brick (Use category B) Hollow Sand-lime Brick (Use category C) Vertically-perforated clay block (Use category C) Hollow Lightweight Concrete Block (Use category D) Lightweight Concrete Block (Use category C) Reinforced components of lightweight aggregate concrete (Use category D) Aerated Concrete Block (Use category D) |
Attachments
Reviews (0)
There are no reviews yet.
![KI-10N LONG EXPANSION ZONE HAMMER-IN FACADE FIXING WITH METAL PIN 10/220MM [BOX OF 250]](/product/image/medium/ki-220n_0.png "KI-10N LONG EXPANSION ZONE HAMMER-IN FACADE FIXING WITH METAL PIN 10/220MM [BOX OF 250]")
![18V DRILL DRIVER BARE TOOL&CASE [BOX OF 1]](/product/image/medium/r-pdd18-s_0.png "18V DRILL DRIVER BARE TOOL&CASE [BOX OF 1]")