This website uses cookies to enhance your experience.

KI-10N LONG EXPANSION ZONE HAMMER-IN FACADE FIXING WITH METAL PIN 10/200MM [BOX OF 250]

Item No. KI-200N
0 reviews Write a review
Hammer-in facade fixing 60mm long expansion zone for high performance in masonry, as well as lightweight and aerated concrete
Price
£158.33
price per BX
incl. tax
Out of stock 19 Low stock 2147483647 In stock
This product cannot be ordered at the moment.
Description

Hammer-in facade fixing 60mm long expansion zone for high performance in masonry, as well as lightweight and aerated concrete

Features and Benefits
  • Easy installation with best performance in lightweight base materials
  • Approved for use in base material categories B, C, D, and E
  • Steel nail allows fast and trouble-free installation with correct expansion of the plug.
  • Reduction of thermal bridge formation (value 0.3W/K) through the integration of an impact-resistant plastic overmoulding on the nail head.
  • Plate stiffness (value 0.5 kN/mm) ensures smooth elevation surface and stable insulation system.
  • Can be used with additional KWL insulation holding plate, available in 90, 110 and 140mm flange sizes.
Base Material
  • Solid Brick (Use category B)
  • Hollow Brick (Use category C)
  • Vertically-perforated clay block (Use category C)
  • Lightweight Concrete Block (Use category C)
  • Reinforced components of lightweight aggregate concrete (Use category D)
  • Aerated Concrete Block (Use category D)
Applications Categories
  • Facades - ETICS
  • Facades - ETICS-2
  • Facades - ETICS-2
  • Thermal Insulation / ETICS
  • Facade insulation / ETICS
Installation Guides
  • Drill a hole of required diameter and depth
  • Drilling depth of min 80mm in approved materials.
  • Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached
  • Embedment depth of min 60mm in approved materials.
  • Hammer the steel nail into the plastic sleeve until fixing is secure and flush with insulation material.
  • In soft insulation panels the fixing should be combined with insulation retaining plates KWL-90, KWL-110, KWL-140.
  • Temperature range when installed -35C to +80C.
Specifications
Applications
External Thermal Insulation Composite Systems (ETICS)
Polystyrene (EPS) boards
Mineral wool (MW) boards
Light wood wool building boards
Polyurethane (PU) boards
Lightweight recycled panels
Base Materials
Solid Brick (Use category B)
Hollow Brick (Use category C)
Vertically-perforated clay block (Use category C)
Lightweight Concrete Block (Use category C)
Reinforced components of lightweight aggregate concrete (Use category D)
Aerated Concrete Block (Use category D)
Reviews (0)
There are no reviews yet.
    Loading
    Loading