![ROUND WIRE BRUSH M20 [SINGLE]](/product/image/medium/r-brush-m20-3%3Dm_0.png "ROUND WIRE BRUSH M20 [SINGLE]")
![ROUND WIRE BRUSH M20 [SINGLE]](/product/image/small/r-brush-m20-3%3Dm_0.png "ROUND WIRE BRUSH M20 [SINGLE]")
ROUND WIRE BRUSH M20 [SINGLE]
Item No.
R-BRUSH-M20/M
Brush accessory for cleaning out holes prior to anchor installation
Description
Brush accessory for cleaning out holes prior to anchor installation
Features and Benefits
- Ideal for cleaning dust from drilled holes prior to applying bonded anchors or installing mechanical anchors
- Hole cleaning is necessary for correct loads
- Suitable for variable anchor embedment depths.
- Suitable for repetitive and frequent use.
Installation Guides
- Drill hole to the required diameter and depth for stud size being used.
- Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.
- Choose extensions and brushes to the selected depth and diameter of the hole, then combine them into one set.
- Connect the drill set with the SDS tip.
- Clean the hole twice with a prepared brush set.
- Clean the hole again with compressed air.
Attachments
Reviews (0)
There are no reviews yet.
![R-KEM II POLYESTER RESIN STYRENE FREE 300ML [BOX OF 10]](/product/image/medium/r-kem-ii-300_0.png "R-KEM II POLYESTER RESIN STYRENE FREE 300ML [BOX OF 10]")
![R-KER-II HYBRID BONDED ANCHOR 400ML [BOX OF 10]](/product/image/medium/r-ker-ii-400_0.png "R-KER-II HYBRID BONDED ANCHOR 400ML [BOX OF 10]")
![BLOWPUMP FOR CLEANING DUST FROM DRILLED HOLES [SINGLE]](/product/image/medium/r-blowpump_0.png "BLOWPUMP FOR CLEANING DUST FROM DRILLED HOLES [SINGLE]")